Light folding desktop Magnifier Magnifying Lamp
Product Parameters
| Model: | 8606AL | 8620L |
| Power: | 3D/5D | 3D/5D |
| Lens diameter: | 127mm | 180X110MM |
| Material: | metal, glass lens or acrylic optical lens, ABS plastic | ABS and Acrylic Fresnel lens |
| Pcs/ carton | 6pcs | 6PCS |
| Weight/carton: | 24kg | 18KG |
| Carton size: | 53X50.5X42CM | 89.5X39.5X49CM |
| LED LAMP | 60PCS LED LAMP | 55PCS LED LAMPS |
| Specification: | Magnifying LampLens material: Optical Arylic lens, Glass lensLens size: 5″Diopter: 3D/5D for choiceSupplied with switching powerLight: 60pcs LEDVoltage: 100V-240V
Power: 3.5W Life of LED: 20000h Luminance: 600Lux |
Magnifying LampLens material: Acrylic(Fresnel Lens)Lens size: 7″*4.32″Diopter: 3D and 5D for choiceSupplied switching powerLight:55pcs LEDVoltage: 100V-240V
Power: 3.5W Life of LED: 20000h Luminance: 800Lux |
8606AL/8602L
Installation Instructions:
1, Before using the product, please pay attention to whether the power supply voltage is consistent with the actual voltage.
2, When changing the direction and position of the magnifying glass, if the adjusting arm lock button is too tight, please relax a little, and then adjust the position and direction before tightening. Never pull forcibly to avoid damaging the components.
3, After turning on the power switch, the lamp is first warmed up for about 1.5 seconds, and then the lamp is normally lit.
4, It is equipped with abnormal state protection. When an abnormal phenomenon occurs in the lamp (the lamp is open, the lamp does not start, and the lamp leaks), the electronic circuit is automatically shut down and locked until the power is turned off to eliminate the abnormal phenomenon.
5, When the lamp is off, check whether it is caused by aging after long-term use. If so, you need to change the lamp. If the lamp does not turn on after replacing the lamp, please check whether the lamp, the lamp plug and the power plug are connected properly.
8620L
